Automatic stretch wrapping machine has full functions: you can choose the form of color film or light film covering on the same equipment; Can be equipped with automatic coding/coding system according to user product packaging requirements; According to the requirements of product packaging, on the basis of vacuuming, N2, O2, CO2 mixed gas or single gas can be filled, and the gas mixing ratio can be conveniently adjusted by the gas control controller.
Automatic stretch wrapping machine is equipped with
power failure protection system,
leakage protection system,
phase sequence protection system, to avoid equipment damage caused by power failure, leakage and manual error, at the same time to ensure the personal safety of operators; Equipment configuration of upper and lower die automatic correction system, through the computer automatically sensing the coating and bottom film direction, timely adjust the coating material in the production process of winding end surface uneven problem, make the product packaging appearance more beautiful, while avoiding the waste of film material.
Maintenance rules of automatic
stretch wrapping machine: periodically increase lubricating oil. Because of the long-term
operation will cause the internal machine running-in is not appropriate, the internal is not fit enough, the appropriate grease can run better. You are advised to add it every 80 days. The standard pressure of automatic
stretch wrapping machine is 0.3MPa. It should not be adjusted too large or too small, otherwise it will constitute machine function paralysis. And the automatic
stretch wrapping machine must have a complete and correct installation before
operation, each time before the
operation of the machine, we must check the inside of the machine to confirm whether there is oil in the oil cup, whether there is water in the filter cup, whether the silicone rod is clean, whether the paste of the heating rod is intact, so as to ensure the quality of each machine
operation.
